Maintain the smooth ride quality of the Talon with our 3" front bracket lift. Level the front of your talon with our front bracket lift. This kit lifts the front of your talon to eliminate the dreaded nose dive. This kit fits Talon models listed below.
ESTIMATED SHIP DATE 3-09-2021
100% bolt on
powder coated black
reduces shock compression
Talon Live Valve
Orders ship within 1-2 business days
Honda Talon 1000 Rear Rack
Extend your cargo storage with a simple bolt-on rack. The rack bolts in place using the 8 stock bolt hole locations. We use the rack to carry two coolers instead piling everybody's into one. A unique way of extending your bed without sacrificing the look.
extended bolts provided
two tone powder coat design
bottom plate made of 3/16" Steel
Top plate made of 1/8" Steel
slots strategically placed for easy tie down
The top plate will be black and the bottom plate will be 1 of the 4 above options.
Note: orders made to ship. Please allow 10 business days for fabrication.
Honda Talon 1000 Winch Bumper
Designed to get you out of the toughest of situations. Made from 1/4" Steel. Mount up a 9K winch without the worry of bending your bumper. Designed to be compatible with most 3,500, 4,500, 5,500, 8,000 and 9,000 lb winches. 100% compatible with 9K winches.
backing plate mounts to the frame as the backbone
heavy duty bolts supplied with the bumper
don't rely on stock mounting points to pull you out
mounting locations for two D-shackles (sold separately)
Powder-coated Black unless bare steel is preferred
Delivery date will be provided upon order. Typically 2-3 week lead time.
Nova 1-2.5 Lift Kit for Honda TRX Rubicon…
Add 1-2.5" of lift
100% bolt on
Run 32" tires
Lift your Honda Rubicon 1 or 2.5". All hardware included to bolt lift kit to stock shock mounting locations. Powder coated black to match the frame.
2020-21 Rubicon 520
2015-2021 Rubicon 500
2015-2021 Rancher 420 IRS
Nova Richardson 112 Hat
Richardson 112 hat with Nova logo on the front. Snap back. Solid front with mesh back.
Color: Heather Grey/Black
Polaris Ranger 1000 3.5" Lift Kit
Add ground clearance to your Polaris Ranger with our 3.5" lift kit. Gain 3.5" of lift by adding our lift to your ride. Achieves a level stance in the front of your ride. Eliminating the dreadful nose dive. Made from 0.25" steel giving you that peace of mind knowing your lift ain't going anywhere.
100% bolt on
level and lifting at the same time
0.25" thick steel
Made in the USA
Step by step instructions are included with each lift.
Polaris Ranger 2018+
Polaris Wheel Bearing Press Plate
Tired of stuck wheel bearings? Press them out evenly with our new wheel bearing press plate. Designed to fit within the slots of the Polaris hubs. Allowing for an even point of contact around the outer race of the bearing. Once the inner race has been pressed out due to failure of the bearing, the outer race can be difficult to remove without the correct tool. We've all used the over-sized socket or random tool laying around the shop. Sold in two sizes based on which model wheel bearing is in your hub.
Please note: some Polaris models have two different size wheel bearings. One size does NOT fit all. Nor will the smaller plate press out the larger bearing properly.